DeMore’s Innovative Design, Inc.
herewith guarantees the structural
integrity of the Aerial Tool Bin
®
product, for one year and warrants it
against all manufacturer defects. This
Warranty is not applicable to any
damage caused by user or caused
by use other than its intended
purpose on aerial platforms.
Replacement subject to approval by
DeMore’s Innovative Design, Inc.
Upon approval, the Aerial Tool Bin
®
will be replaced free-of-charge.
Call DeMore's Innovative Design, Inc.
for assistance at: 262-825-6784
Thank You for putting your trust
in the Tool Bin Man
®
and
choosing the Aerial Tool Bin
®
.
www.aerialtoolbin.com
1 Year Warranty
200414 ATB-1312 Insert Card
INSTRUCTIONS for Model ATB-1312
1) Remove the warranty and keep in a safe place for your records.
2) Read all warnings on bin and equipment where bin is used.
3) Remove the divider separators and all
components from the packaging on the
sides of the Aerial Tool Bin
®
.
4) Place the Dividers in the channel slots and
allow bottom of divider to insert weep holes.
5) Fasten the tool belt hanger bar with the
two small carriage bolts provided. Insert the
1
1
/
2
" carriage bolt with wing nut to help retain
the tool pouch and Secure the bar.
6) Insert the two long Lift Rail safety locking
bolts, (provided) Prior to operating your aerial lift.
7) To insert the tool pouch, remove the carriage bolt from the tool belt hanger
bar and slide the tool pouch on. Re-insert the carriage bolt.
8) Load your larger tools in the Aerial Tool Bin
®
and you're ready to go to work.
DeMore's Innovative Design, Inc.
U.S. Patent No.: D675.824
Made in the USA
Divider
Separators
Tool Belt
Hanger Bar
2 long Lift Rail
safety locking
bolts
Lock Nuts
Flat
Washers
Small
Carriage
Bolts
1
1
/
2
"Carriage
Bolt & Wing
Nut
