●
●
2.5
Responsibility of the owner
Information on safety at work refers to the regulations of the European Union that apply when the DRF 200 friction
wheel travel drive is manufactured. The owner is obliged to ensure that the specified industrial safety measures
comply with the latest rules and regulations and to observe new regulations during the entire service life of the
DRF 200 friction wheel travel drive. Local industrial safety legislation and regional regulations and codes of prac‐
tice applicable at the site of operation of the DRF 200 friction wheel travel drive must be observed outside the
European Union.
General safety, accident prevention and environmental protection regulations that apply where the DRF 200 fric‐
tion wheel travel drive is in operation must be observed and complied with in addition to the safety instructions
contained in these assembly instructions.
The owner and any personnel authorised by him are responsible for correct operation of the DRF 200 friction
wheel travel drive and for clearly defining responsibilities for installation, operation, maintenance and cleaning.
The assembly instructions must be followed in full and without any limitations.
Special local conditions or applications may lead to situations which are not considered in these assembly instruc‐
tions. In such cases, the required safety measures must be defined and implemented by the owner. Necessary
measures may also relate, for example, to the handling of hazardous materials or tools and the provision/wearing
of personal protection equipment. The assembly instructions must, if required, be supplemented by the owner
with instructions relating to organisation of work, working procedures, authorised personnel, supervising and re‐
porting obligations, etc. For further information, see
"Safety instructions for operation", Page 34.
Furthermore, the owner must ensure that
● any further working and safety instructions resulting from the risk assessment of the workplaces at the installa‐
tion are specified in operating procedures.
● personnel who work with or on the installation are provided with appropriate first-aid equipment. Personnel
must be trained in the use of the first-aid equipment.
● the assembly instructions are always kept available in the immediate vicinity of the installation for installation,
operating, maintenance and cleaning personnel.
● personnel are trained in accordance with the work to be performed.
● the installation is only operated when in safe and proper working order.
● safety devices are always kept freely accessible and are checked regularly.
● national regulations for the use of cranes and lifting appliances are observed.
● any specified regular checks and inspections are carried out on time and are documented.
The owner is urged to develop procedures and guidelines for any malfunctions, to instruct users and to affix these
instructions at a suitable place where they can be easily seen.
10
214
39
5 44/120
914
Summary of Contents for DRF 200
Page 51: ...214 395 44 120914 51...
