DEMAG DC-Com 1, Operating Instructions Manual

Page: 101 / 116

11 Accessories
11.1 Assemblies
Fig. 75
Item Description Size Order no.
1
Bottom block with cut-off springs (e.g. for hot applications) consisting of:
Bottom block, cut-off springs, grooved pins with round head, load capacity
plates
DC-Com 10 2/1 715 431 45
2
Return sprocket assembly, consisting of:
1 return sprocket, 1 pin, 1 retaining ring, 1 supporting washer, 2 thrust wash‐
ers, 2 needle-roller assemblies
DC Com 1/2 717 808 45
DC-Com 5 718 808 45
DC-Com 10 715 808 45
3
Cut-off spring (e.g. for hot applications), consisting of:
2 cut-off sleeves, 1 pressure spring each for V1 and V2
(for DC 10, 2/1 reeving: 2x part no.)
DC Com 1/2 717 250 45
DC-Com 5 718 250 45
DC-Com 10 715 250 45
Tab. 71
214
80
2 44/291
113
101