RDM Network Scanner User Guide
Compliance statements
©2021 RDM Corporation
Page 3
Compliance statements
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Warning: Changes or modifications not expressly approved by RDM Corporation
could void the user’s
authority to operate the equipment.
All units covered by this manual have no user-serviceable parts inside. In the event repairs are ever
needed to any RDM product, they should be performed by RDM Corporation or an authorized
representative of RDM Corporation. For information please contact RDM Corporation, 619A Kumpf
Drive, Waterloo, Ontario, Canada N2V 1K8, at 1-800-567-
6227, or RDM’s US service agent below.
US Service Agent
Kortney Nordrum
(651)-490-8614
[email protected]
