EC9100i Series Scanner User Guide
Operating the scanner
©2021 RDM Corporation
Page 21
Auto-feed (AF) models
1.
Place up to 30 documents into the document feeder.
Note: Do not push documents past the check icon on the right side of
the document feeder.
2.
If you are required to do so, start the scanning process. For example,
click Scan on your scanning application.
View Feeding checks on a RDM Auto-feed check
Alternatively visit:
https://www.youtube.com/user/RDMCorporation/playlists
Swiping magnetic stripe cards (optional)
1.
Place the card in the slot on the side of the scanner with the stripe
down and facing towards the body of the scanner.
2.
Swipe the card from front to back.
Imaging identification cards
The ID imager uses the same track as the document scanner, but
you insert ID cards at the back of the scanner. Insert the card into
the scanner so that the front of the ID card faces away from the
scanner. The ID imager scans both the front and back of the
identification card.
1.
Insert the identification card into the back of the scanner
track until you feel the scanner pinch the card.
The scanner pulls the card through the track.
2.
Remove the card from the front of the scanner track.
