background image

AA battery(Optioall)

5.  Forward

Vertical shape
With RGB light

RGB LED Light

Press the forward key and backward key at the same time for 3s to 
turn on or turn off the RGB light.

7.  ON/OFF switch

6.  Backward

1

9.  USB nano receiver

8.  AA battery

2

3
4

5
6

Specification

DPI
Polling rate
Working voltage
Working current
Compatible system

1000/1200/1600
150Hz
1.5V

≤32mA

Windows 8/10/mac OS

Rebuilding up the Connection between Mouse and Receiver

If your mouse cannot work normally, you can try to build up the 
connection again between mouse and receiver, as following steps:
1.Take out the nano receiver from computer and insert again, 
   it will detect automatically for about 15 seconds. 
2.Keep the mouse in ON mode and with battery in correct direction.
3.Keep the effective distance within 10CM between the mouse and 
   receiver
4.Press the left button and right button at the same time for about 
   1-3 seconds, then release it. The connection is being built for about  
   10 seconds.
5.If you cannot build up the connection in 10 seconds, please repeat the 
   above steps.

Debugging Tips

●  Check the receiver if it s connected to the USB port.
●  Check the ON/OFF button if in ON mode.
●  Check the effective distance between mouse and the receiver, 

    and shorten it.

●  Rebuild up the connection between the mouse and receiver.

7

8

9

Reviews: