23
GB
h) Keep handles and grip surfaces dry,
clean and free from oil and grease.
Slippery handles and grip surfaces do
not permit safe operation and control
over the power tool in unexpected situ-
ations.
5)
CAREFUL HANDLING AND USE
OF BATTERY DEVICES
a) Charge the batteries only in charg
-
ers that are recommended by the
manufacturer.
Risk of fire if a charger
that is suitable for a specific type of
battery is used with other batteries.
b) In the power tools, use only the
batteries designed for the purpose.
The use of other batteries may result
in injuries and risk of fire.
c) Keep the unused battery away
from paper clips, coins, keys, nails,
screws and other small metal ob
-
jects, which could cause bridging of
the contacts.
A short circuit between
the battery contacts may cause burns
or fire.
d) If used incorrectly, liquid may leak
from the battery. Avoid contact with
this. In the event of accidental con-
tact, rinse off with water.
If the liquid
gets into eyes, seek medical assis-
tance. Leaking battery fluid may cause
skin irritations or burns.
e) Do not use damaged or altered bat
-
teries.
Damaged or altered batteries
can be unpredictable and lead to fire,
explosion or risk of injury.
f) Do not expose batteries to fire or
elevated temperatures.
Fire or tem-
peratures over 130 °C can cause an
explosion.
g) Follow all instructions for charging
and never charge the battery or the
battery-powered tool outside the
temperature range stated in the op
-
erating instructions.
Incorrect charg-
ing or charging outside the permitted
temperature range may destroy the
battery and increase the risk of fire.
6) SERVICE
a)
Have your power tool serviced by a
qualified repair person using only
identical replacement parts.
This will
ensure that the safety of the power
tool is maintained.
b) Never repair damaged batteries.
All
battery repairs should be carried out
by the manufacturer or authorised cus-
tomer service centres only.
7) ADDITIONAL SAFETY
INSTRUCTIONS
c)
Do not use any accessories
that are not recommended by
DELTAFOX.
This can result in electric
shock or fire.
Safety information for
cartridge guns
1. Keep hands and clothing away from
the push rod and piston. Otherwise,
your fingers or clothes may get
caught.
2. Hold the tool at the handle.
3. Always work in a well ventilated en-
vironment and wear suitable safety
equipment based on the work to be
done.
4. Read and follow the manufacturer
instructions for the sealant or glue be-
fore use.
Summary of Contents for 77005301
