NovoTouch User Manual
Copyright © 2019 Vivitek. Vivitek is a trademark of Delta Electronics, Inc.
Page
25
Getting Started
Installing the Wi-Fi USB Dongle
In order for the display to have access to a wireless network or Internet, you must first
install the Wi-Fi USB Dongle included with the product. When installing the Wi-Fi dongle
you must ensure that it is installed into the correct USB 3.0 port, as indicated below:
Insert the Wi-Fi USB dongle into the USB 3.0 port on the right side of the display.
Powering the Display
After mounting/installing the NovoTouch in the desired location you must supply power
to the display using the following steps:
1. Plug the supplied power cable into the display and a power source.
NOTE: Only use the power cable provided in the packaging with the display.
A
U
D
IO
IN
T
O
U
C
H
2
T
O
U
C
H
1
