NovoDisplay User Manual
Copyright © 2019 Vivitek. Vivitek is a trademark of Delta Electronics, Inc.
40
Press the input source (
) button on the display.
DK430 / DK550
DK650 / DK750
Press the
SOURCE
button on the remote control.
Once the input source menu is open use the up (
▲) or down (▼) button on either the
display or the remote control to select the video input you want to show on the display,
and then press the menu (
) button on the display or the
OK
button on the remote
control to confirm your selection.
NOTE: The OPS selection in the input source menu will only appear when the OPS module is
installed in the display. See the Installing the OPS Module section for more information on
installing the OPS module.
Setting up an Internet Connection
NovoDisplay is able to connect to the internet using one of the following methods:
