45
2.2
Signage
Signage is used to display the information of a single UNOnext. As shown in Figure 34,
Signage is divided into display and control management functions, and provides use of
language switching , UNOnext Operation Panel , and Globalview . The display logic for
the numerical value and the icon is basically the same as that of Globalview; see Globalview.
Figure 34 Signage function analysis
Main display functions are as follows:
Temperature and humidity sensor values.
Air quality sensor value: UNOcentral will detect whether the sensor on the connected
UNOnext is installed. If it is not installed, the information will be hidden. At the same time,
it will be according to Table 6 to display values and corresponding colors.
Ventilation equipment switch (note): There are three states: on, off, and equipment
abnormality warning, each of which is displayed using a different icon. As shown in Table
Ventilation equipment filter status (note): Displays Table 8 in 4 different colors according
