Delta TP70P, Quick Start Manual

Page: 11 / 65

T P 7 0 P Q u i c k St a r t
1 - 8
Item Range
N Master control loop N0~N7: 8 N devices
P Pointer P0~P255: 256 pointers
External interrupt
I000/I001(X0), I100/I101(X1)
(01: Rising edge-triggered
; 00: Falling edge-triggered )
Timer interrupt I602~I699, I702~I799: 2 interrupts (Time base=1 ms)
High-speed interrupt I010: 1 interrupt
Pointer
I
Inte
rrupt
Communication
interrupt
I150 (COM2): 1 interrupt (*3)
K Decimal system
K-32,768~K32,767 (16-bit operation)
K-2,147,483,648~K2,147,483,647 (32-bit operation)
Cons
ta
nt
H Hexadecimal system
H0000~HFFFF (16-bit operation)
H00000000~HFFFFFFFF (32-bit operation)
Note:
*1: They are not latching/retentive devices. They can not be changed.
*2: They are latching/retentive devices. They can not be changed.
*3: Please refer to section 1.9 for more information.
*4: Please refer to section 1.5.1 for more information.
1.6 Electrical Specifications
1.6.1 Specifications for PLCs
Model
Item
TP70P
-16TP1R
TP70P
-32TP1R
TP70P
-22XA1R
TP70P
-21EX1R
TP70P
-RM0
CPU 32-bit ARM Cortex-M4 MCU
Program
memory Flash ROM: 128 MB
(OS: 30 MB/Backup: 16 MB/User AP: 82 MB)
Internal
memory
64 Mbytes
Retentive
memory
32 Kbytes
Supply
voltage
24 V DC (-15%~20%) (DC input power polarity reversal protection)
Electric
energy
consumption
5W 5W 5W 5W 3W
Power
protection
DC input power polarity reversal protection
Insulation
impedance
> 5 M
Ω
(The voltage between all I/O terminals and the ground is 500 V DC.)
Noise
immunity
ESD (IEC 61131-2, IEC 61000-4-2): 8 kV Air Discharge
EFT (IEC 61131-2, IEC 61000-4-4): Power Line: 2 kV, Digital I/O: 1 kV, Analog &
Communication I/O: 1 kV
Damped-Oscillatory Wave: Power Line: 1 kV, Digital I/O: 1 kV
RS (IEC 61131-2, IEC 61000-4-3): 26 MHz~1 GHz, 10 V/m
Ground
The diameter of the ground used should not be less than the diameters of the wires
connected to the power terminals of the PLC used.
(If several PLCs are used simultaneously, please use single-point ground.)
Battery 3 V CR2032 battery
Battery
lifespan
3 years at a temperature of 25
℃
Operating
temperature
0°C~50°C
Relative humidity: 20% - 90% RH
【
0~40
℃
】
,10%~55% RH
【
41~50
℃
】
Pollution degree 2 (No condensation)