Delta RPI M50A Installation And Operation Manual Download Page 80

Page: 80 / 166

8 Settings

Installation and Operation Manual for Inverter RPI M50A_12s V1 EU EN 2017-03-09

8.3.3 Baud rate

Overview

This function allows you to set the RS485 baud rate.

If multiple inverters are connected via RS485

then the same baud rate must be set at every

inverter.

Setting options

Parameter

Description

Setting range

Baud rate

Baud rate for RS485

9600 | 19200 | 38400

Menu item path

Main menu > General settings > Baud rate

Setting the Baud rate for RS485

E-Today: 0kWh

Power: 0W

Status: On Grid

10.Sep 2014 15:32

If the default information is displayed, press any button to open the main menu.
Otherwise, press the

EXIT

button repeatedly until the main menu is displayed.

Inverter Info.
General Settings
Install Settings
Active/Reactive Pwr
FRT

Use the

and

buttons to select the

General Settings

entry and then press the

ENT

button.

Protocoll

Baud rate

Date & Time

Language

Use the buttons

and

to select the entry

Baud Rate

and then press the

ENT

but-

ton.

38400

19200

9600

Use the

and

buttons to configure the value and then press the

ENT

button.

Summary of Contents for RPI M50A







































































































































































Search results

Summary of Contents for RPI M50A

Reviews:

Delta RPI M50A, Installation And Operation Manual, Page: 80 / 166

Search results

Summary of Contents for RPI M50A

Reviews: