103
Installation and Operation Manual for Inverter RPI M50A_12s V1 EU EN 2017-03-09
8 Settings
8.4.10 Anti-islanding
Change this setting only after consultation with
Delta customer service.
Overview
To change this setting, you need a special
password provided by Delta customer service.
You can find the contact information on the back
of this document.
This function allows you to switch the anti-islanding protection on
and off.
Setting options
Parameter
Description
Setting range
Anti-islanding
Switch the anti-islanding protection on and off.
ON
|
OFF
Menu item path
Main Menu > Install Settings > Anti-islanding
Setting the anti-islanding
E-Today: 0kWh
Power: 0W
Status: On Grid
10.Sep 2014 15:32
1.
If the default information is displayed, press any button to open the main menu.
Otherwise, press the
EXIT
button repeatedly until the main menu is displayed.
Inverter Info.
General Settings
Install Settings
Active/Reactive Pwr
FRT
2.
Use the
and
buttons to select the
Install Settings
entry and then press the
ENT
button.
Password 0 * * *
energy production.
Adj. would affect
Warning:
3.
Enter the password provided by Delta customer service.
Use the
and
buttons to set the individual numerals.
Press the
ENT
button to confirm a number.
AC Connection: 3P3W
EPO: Normal Close
Anti-islanding: ON
Max. Power: 100%
Return to Factory
4.
Use the
and
buttons to select the
Anti-islanding
entry and then press the
ENT
button.
5.
Use the
and
buttons to select a mode and then press the
ENT
button.
