04 Wiring | REG2000
4-16
4-3 Control Circuit Terminals
Remove the top cover before wiring the multi-function input and output terminals.
The units shown in the figures are for reference only and your drive may look different.
Removing the outer cover for wiring
1) Screw torque: 14–16 kg-cm [12.15–13.88 lb-in.]
(1.37–1.57 Nm).
Loosen the screws for the wiring top cover as shown in the diagrams below.
Frame A, B Frame C
2) After loosening the screws, remove the wiring top cover as shown in the diagrams below.
Frame A, B Frame C
