PCI-DMC-A01/B01 User Guide
Chapter 3 Using EzDMC
3-4
July 2014
3.5 EzDMC Status Display
The status display at the bottom of EzDMC shows information about the current status of
the PCI-DMC-01 card. This is shown in Figure 3.6:
Figure 3.6
❶
: FIFO length
❷
: Task time that currently used
❸
: Linkage status of control card and connected extension modules
❹
: MailBox error count
3.6 Single-axis Control Interface
When you add the connected extension modules to the serial communications link, the next
step is to test the expansion module operations. As shown in Figure 3.7, you can go to the
“Left Display Block (
)” and click on the “icon (
)” for any expansion module and the “right
display block (
)” will pop-up with the single-axis control interface window for that module.
This can be used to control the single-axis operation of that module.
Figure 3.7
