background image

MultiChoice

®

 Valve Trim with Diverter

Installation Instructions
Owners Manual
Models T27

Write purchased model number here.

You May Need

THIS VALVE MEETS OR EXCEEDS THE

FOLLOWING STANDARDS: ASME A112.18.1/

CSA B125.1 and ASSE 1016 (Type -P- or -T-).

CAUTION:

 This system/device must be set by the

installer to ensure safe, maximum temperature.

Any change in the setting may raise the discharge

temperature above the limit considered safe and

may lead to hot water burns.

NOTICE TO INSTALLER: CAUTION!–As the

installer of this valve, it is your responsibility

to properly INSTALL and ADJUST this valve

per the instructions given. This valve does

not automatically adjust for inlet temperature

changes, therefore, someone must make the

necessary Rotational Limit Stop adjustments

at the time of installation and further adjustments

may be necessary due to seasonal water

temperature change. YOU MUST inform the

owner/user of this requirement by following

the instructions.

 If you or the owner/user are

unsure how to properly make these adjustments

please refer to page 6

 and if still uncertain, call 

us at 

1-800-345-DELTA.

After installation and adjustment, you must affix

your name, company name and the date you

adjusted the Rotational Limit Stop to the caution

label provided and apply or attach the label to

the back side of the closest cabinet door and the 

warning label to the water heater. 

Leave this 

Instruction Sheet for the owner’s/user’s 

reference. 

WARNING: This pressure balanced or

thermostatic bath valve is designed

to minimize the effects of outlet water

temperature changes due to inlet pressure

changes, commonly caused by dishwashers,

washing machines, toilets and the like. It may

not provide protection from hot water burns

when there is a failure of other temperature

controlling devices elsewhere in the

plumbing system, if the rotational limit stop

is not properly set or if the hot water

temperature is changed after the settings are

made or if the water inlet changes

due to seasonal changes.

WARNING: Do not install a shut-off device on

either outlet of this valve. When this type of

device shuts off the water flow, it can defeat

the ability of the valve to balance the hot and

cold water pressures.

Rev. A

1

104438

Table of Contents:

Warranties ...............................................................................  Page   2
Installation Instructions ...........................................................   Pages   3 - 7 
Clean and care.........................................................................  Page   9
Maintenance ............................................................................ Page   9
Cartridge Summary Reference Sheet .....................................   Page   9

For additional replacement parts, visit www.deltafaucet.com

01/24/2019

3/32"

Summary of Contents for MultiChoice T27



































Reviews: