Delta DX-3001 Series User Manual Download Page 38

Page: 38 / 123

Chapter 3 Introduction to Functions

3-13

Description

Default

Set up the connection check times, 0 indicating infinity. Once a
disconnection is detected, and the option “Always online” or “On-demand
connection” is selected, the router will redial according to the set value in
the Redial Times.

MTU

Maximum Transmission Unit is the largest packet that can be transmitted
over packet based networks.

1492

3.2.4

WAN

This page is used for setting up the WAN, including the IP address, network mask, gateway and DNS.

Description

Default

WAN Mode

Your device can connect to the internet via the WAN port with a Dynamic IP
or Static IP.



Static IP: Manually set up the IP address.



Dynamic IP: DHCP (Dynamic Host Configuration Protocol) allows you to

DHCP

Summary of Contents for DX-3001 Series




























































































































Search results

Summary of Contents for DX-3001 Series

Reviews:

Related manuals for DX-3001 Series

Brands by name

Popular brands

Delta DX-3001 Series, User Manual

Search results

Summary of Contents for DX-3001 Series

Reviews:

Related manuals for DX-3001 Series

Brands by name

Popular brands