Delta DVS-G928 series, User Manual

Page: 62 / 206

D V S L a y e r 3 G i g a b i t M o d u l a r Ma n a g e d I n d u s t r i a l E t h e r n e t S wi t c h U s e r M a n u a l
3 - 4 4
_3
Description Factory default
VLAN ID
Enter the identifier for the new VLAN. The range can be set in the range of 1 to
4094.
1
VLAN Name
Enter a name for the VLAN. The name can be up to 32 alphanumeric characters
long, including blanks.
None
Port Members
If the interface is not a member of VLAN, the square must keep blank. The port
currently is not the static member of the VLAN, but it can be added dynamically
by other protocols, for example by GVRP.
Checked

Add New VLAN
Enter the identifier and a name for the VLAN, and the range of VLAN ID is from 1 to 4095. You can add and configure all
interfaces as members to the specific VLAN
3.5.2 Ports

Ethertype for Custom S-ports
Description Factory default
Entertype for Custom S-ports
Specify the ether type used for Custom S-ports. This is a global setting for all the
Custom S-ports.
0x88A8

Ports Configuration
Ports Configuration is used to defined all interface with three difference type:

Unware: It can be used for 802.1 QinQ, and the TPID of frame will be set to 0x8100.

C-port: The TPID of frame will be set to 0x8100.

S-port: The TPID of frame will be set to 0x88A8

S-custom-port: The TPID of received frame will be set to 0x88A8, and the transceived frame will be set to a
customize value which from the Ethertype for Custom S-port.