Delta DVS-328 series, User Manual

Page: 121 / 246

D V S M a n a g e d I n d u s t r i a l R a c k Mo u n t E t h e r n e t S wi t c h U s e r Ma n u a l
3 - 1 0 0
AS Configuration
Description Factory default
Active Server Address Type
Specify a type of address for the AS.

IPv4: The AS server has an IPv4 address.

DNS: The AS server has a DNS host name.
None
Active Server Address
Depending on the selection from the Active Server Address Type drop-down list, enter
the IP address or the DNS host name of the AS. The IP address or the
DNS host name needs to be already listed in the Server Configuration
table.
None
Retransmit
The number of times the switch searches for the AS in the Server
Configuration table if the switch can not establish a connection with the AS at the first
attempt. Enter a number in the range of 1 to 100.
2
3.11.2.6 Login Authentication
The Delta switch provides three authentication methods: Local, RADIUS, and . If there is no RADIUS
or server in your network environment, you can use the local authentication method for the login
authentication.
Login Authentication
Description Factory default
Login Authentication Mode
Specify the login authentication method:

Local: A locally stored user ID and a password are used for the authentication. This
is the default setting. You need to set up a user account on the Local User
Management page.

RADIUS: The user ID and the password are authenticated through a RADIUS
server.

: The user ID and the password are authenticated through a
server.
Local
3.11.2.7 Login User Sessions
The login user session is displayed on this page. The Delta switch supports up to 20 users, including the default
user admin.