Delta DVP-20PM, Instruction Sheet

Page: 2 / 20

- 1 -
………………………………………………………………… ƒ ENGLISH ƒ …………………………………………………………………
a
This instruction sheet only provides information on electrical specification, functions
and wiring. For detailed information on programming and instructions, please refer to
“DVP-PM Application Manual: Programming”
. For more information about the
optional peripherals, please see individual product instruction sheet or
“DVP-PLC
Application Manual: Special Modules”
.
a DVP-20PM is an OPEN TYPE device and therefore should be installed in an
enclosure free of airborne dust, humidity, electric shock and vibration. The enclosure
should prevent non-maintenance staff from operating the device (e.g. key or specific
tools are required for operating the enclosure) in case danger and damage on the
device may occur.
a
DO NOT connect the AC main circuit power supply to any of the I/O terminals, or it
may damage the PLC. Check all the wirings before switching on the power. Make
sure the ground terminal
is correctly grounded to prevent electromagnetic
interferences. DO NOT touch any terminals when the power is on.
ƒ
Product Profile & Dimension
DIN rail (35mm)
DIN rail clip
Output indicator
I/O terminal No.
I/O terminals
[ Figure 1 ]
Function card/
memory card cover
I/O module
connection port cover
I/O terminal cover
Communication
port cover
Input indicator
Mounting screw
Direct mounting hole
Battery socket
COM2 (RS-485)
[ Figure 2 ]
Function card mounting hole
I/O module
connection port
Battery
POW ER/BAT.LOW/
ERROR indicator
MANU/AUTO switch
COM1 (RS-232)
Function card port
[ Fig ure 3 ]
Unit: mm
82.2
164
174
90 80
ƒ
Electrical Specifications
Power supply voltage 100 to 240 VAC (-15 to 10%), 50/60Hz ± 5%
Fuse capacity 2A/250 VAC
Power consumption 60 VA
DC24V current output 500 mA
Power protection DC24V; output short-circuited
Withstand voltage
1,500 VAC (Primary-secondary); 1,500 VAC (Primary-PE); 500 VAC
(Secondary-PE)