TECHNICAL DATASHEET
CliQ II DIN Rail Power Supply
24V 480W 1 Phase / DRP024V480W1B
□
All parameters are specified at 25°C ambient and AC input unless otherwise indicated.
www.DeltaPSU.com (November 2020, Rev. 07)
3
Mechanical
Case Cover / Chassis
Aluminium
Dimensions (L x W x D)
121 x 144 x 118.6 mm (4.76 x 5.67 x 4.67 inch)
Unit Weight
1.37 kg (3.02 lb)
Indicator
Green LED DC OK
Cooling System
Convection
Terminal
Input 3 Pins (Rated 300V/30A)
Output 4 Pins (Rated 300V/30A)
Wire
Input AWG 18-10
Output AWG 12-10
Mounting Rail
Standard TS35 DIN Rail in accordance with EN 60715
Noise (1 Meter from power supply)
Sound Pressure Level (SPL) < 40dBA
Environment
Surrounding Air Temperature
Operating -25°C to +75°C (Cold Start at -40°C)
Storage -40°C to +85°C
Power De-rating
Vertical Mounting > 50°C de-rate power by 2.5% / °C,
> 70°C de-rate power by 5% / °C
Operating Humidity
5 to 95% RH (Non-Condensing)
Operating Altitude
0 to 2,500 Meters (8,200 ft)
Shock Test
Non-Operating IEC 60068-2-27, 30G (300m/S²) for a duration of 18ms,
1 time per direction, 2 times in total
Vibration
Non-Operating IEC 60068-2-6, 10Hz to 500Hz @ 30m/S² (3G peak);
60 min per axis for all X, Y, Z direction
Bump Test
Operating IEC 60068-2-29, Half Sine Wave: 10G for a duration of 11ms,
1,000 times per direction, 6,000 times in total
Over Voltage Category
III
According to IEC/EN 62477-1 / EN 60204-1
(clearance and creepage distances) and
IEC 62103 (safety part)
Pollution Degree
2
Protections
Overvoltage
< 32V, ±10%, SELV Output, Hiccup Mode,
Non-Latching (Auto-Recovery)
Overload / Overcurrent
> 200% of rated load current, Hiccup Mode,
Non-Latching (Auto-Recovery)
Over Temperature
< 80°C Surrounding Air Temperature @ 100% load,
Non-Latching (Auto-Recovery)
Short Circuit
Hiccup Mode, Non-Latching
(Auto-Recovery when the fault is removed)
Internal Fuse at L pin
T8AH
Degree of Protection
IP20
Protection Against Shock
Class I with PE* connection
*PE: Primary Earth
