background image

                            

Quick Installation Guide

Battery Storage System

BX6.3_AC100

Descriptions of Components

Dimensions and Interface Overview

LED Indicators

Push Button

Installation

Warning

Definition

On Grid mode
On Grid count down

PCS Error
Standalone mode
Standalone count down
Battery Error

Communicating

LED Status

LED

GREEN ON

Grid

SPS

(Stand-alone Power System)

Comm.

GREEN FLASH 1s ON/OFF

Grid setting “default”

GREEN FLASH 0.1s ON/OFF
RED ON
GREEN ON
GREEN FLASH
RED ON

GREEN ON

SBMS Balance mode

SBMS Force_CHG

Maintenance Mode

Grid / SPS

GREEN FLASH

Grid ON 1s        SPS ON 1s

No communication

OFF

Battery Power OFF

RED FLASH

Danger to life through electric shock

Potentially fatal voltage is applied to the unit during operation.

This voltage persists even 60 seconds after disconnection of the power supply.

Never open the unit.

The unit contains no components that must be maintained or repaired by the operatoror installer.

Opening the housing will void the warranty.

60 seconds

● 

Do not install BX6.3_AC100 near or on flammable surfaces.

● 

Please mount BX6.3_AC100 tightly on a solid / smooth surface.

● 

Install BX6.3_AC100 in a location that prevents damage from flooding.

● 

Do not expose BX6.3_AC100 to ambient temperatures above 60°C or below -20°C. 

● 

Operating or storing BX6.3_AC100 in temperatures outside its specified range might cause damage

   to BX6.3_AC100.

Do not open this product or insert tools due to shock and fire hazard which may cause injury.

When installing this product you must adhere to the following instructions:

● 

The product is intended to be installed and operated by qualified personnel or service personnel only.

● Do not power up the device before installation is complete.

● All circuit breakers must be in the OFF position before commencing installation.

To establish a successful communication between Inverter Wi-Fi to MyDeltaSolar Cloud, in the Wi-Fi

connection setup page, the signal strength must be above -70dBm between each Wi-Fi device (Wi-Fi

router, inverter, DC1…etc.). In case the signal strength is below -70dbm, it may cause certain

communication errors which may prevent a successful Wi-Fi communication. To avoid such issues,

Please adjust the Wi-Fi device position to improve the signal strength/quality.

Description

1

Residential AC ESS

5

Protective cover for non-critical waterproof and dust prevent  

6

Protective cover for non-critical waterproof and dust prevent 

7

Connector for AC connection
Protective cover to prevent users from touching the power cable
120A current transformer
Cable for CT connection

8
9

10

2

The Instruction to provide the information of safety,

Installation and specification.

3

2.4 Ghz Wi-Fi Antenna (IPX7)

4

Object

Delta BX6.3_AC100

Rubber cover

Plastic cover

AC Plug

Wiring Cover

Current sensor

CT cable

Quick Installation Guide

WiFi antenna

Antenna Bracket

Qty

1

1

1

1
3
1
2
1
1

1

To support Wi-Fi antenna on BX6.3_AC100 

To disconnect H4 connector

11

H4 Wrench

2

Grid

SPS

Comm.

100 mm

>30 mm*

100 mm

100 mm

100 mm

90

°

Push

Button

Ex Comm.

AC Output

COMM.

RS-485 / DRM /

Dry contact / CT port

Please refer to the direction shown as the figure

to install the communication module.

BT+

BT-

Wi-Fi Reset *

Battery

Earth

It is prohibited to open the front door.

It may cause failure and the warranty

will void once the door is opened.

unit: mm

 570

 50

 840

 60

 250 

Please keep enough space

for wiring and pipping.

(Max.: 400 mm)

* Please refer to regulation AS/NZS 5139:2019 for detail installation space requirement. 

  To avoid extra fireproof cement sheeting installation requirement, it is recommended to keep at least 300mm

  between the wall and BX. 

Wi-Fi LED Status

Explanation

Wi-Fi LED flashing once

every one seconds

Reset Wi-Fi module, and Wi-Fi password

returns to the default: DELTASOL

Wi-Fi LED flashing once

every half a second

Reset Wi-Fi module

Operation
Push 3s~10s

Push 20s~

No flash

No function

Push 10s~20s

Status

Operation

Action

BX6.3_AC100 power OFF

Grid supplied

Power ON the unit
(AC start-up)

BX6.3_AC100 power OFF

Power button push > 20 sec
(until grid green LED flash)

Power ON the unit
(Cold start-up)

BX6.3_AC100 power ON already

Power button push >1 sec

Power OFF the unit

For more instruction and specification, please scan QR-code to see user manual.
> Battery > BX6.3_AC100 Operation and Installation Manual

BX6.3_AC100 user manual

https://mydeltasolar.deltaww.com/?p=product_manual

500 mm

* Wi-Fi reset button function

Reviews: