Chapter 8 Parameters
ASDA-A2R Series
Revision December, 2014
8-269
From the above figure, when motor outputs 200% of current,
the protection level will trun to overload level from the normal
one in 8*PM-19 seconds (the setting is accoding to the motor
that users select). When motor outputs no current, the motor
temperature drops to the normal level within 12*PM-20
seconds. That is to say, if users operate the motor by the
above pattern, it will not exceed the protection level. However,
if motor only generates no current in a short time, it will
exceed the protection level.
PM-20
Overload Gain (Temperature Falls)
Address:
Applicable
motor type
：
ALL
Related Section: -
Operational
Interface
：
Panel / Software Communication
Default
：
100
Unit
：
%
Range
：
15~600
Data Size
：
16bit
Format
：
DEC
Settings
：
Please refer to PM-19
PM-21
Cogging Compensation
Address:
Applicable
motor type
：
ALL
Related Section: -
Operational
Interface
：
Panel / Software Communication
Default
：
0x1A00
Unit
：
0%
200%
Protection level
Motor current
8sec*PM-19
12sec*PM-20
Overload level
Normal level