7
7. Legs
(2)
8. Bag Retainer Clamp (2)
9. Bag Hanging Rod (2)
10. Caster (4)
11. Intake Cap and Ring (4)
12. Knob for Blower/Motor Assembly (4)
3. Dust
Intake
Port
4. Cloth-covered Bag-retainer Ring (2)
5. One-Micron Upper Filter Bags (2)
6. Six-mil Plastic Lower Collection Bag (4)
13. 3/8” (9.5mm) Flat Washer for Knobs (4)
14. 5/16” (8mm) Flat Washers for Casters (16)
15. M4 Sheet Metal Screw for Dust Intake Port (4)
8
4
3
7
6
9
5
13
12
11
10
14
15
16. Bracket for Bag-hanging Rod (2)
17. 5/16” x 3/4” Hex-Head Screws (22) ( 6 are for attaching the bracket )
18. 5/16” (8mm) Flat Washer for Bracket (6)
16
17
18
UNPACKING AND CLEANING
Carefully unpack the machine and all loose items from the shipping container(s). Remove the rust-preventative oil from
unpainted surfaces using a soft cloth moistened with mineral spirits, paint thinner or denatured alcohol.
Do not use highly volatile solvents such as gasoline, naphtha, acetone or lacquer thinner for cleaning your
machine.
After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.
