____________________________________________
Page
11
the mains and frequency. Further details about the pump and tank are given
overleaf.
Optional Extras and Accessories
Water Tank : type RWT
This is a shallow, cylindrical, open topped, UV-protected, polypropylene tank,
diameter 4 ft (1.22 m), height 14 inches (35 mm). The Basic Root Washer stands
in it from which it catches the dirty water, which can either be recycled using the
pump, or drained away via an overflow pipe with tap and 5 m of ½ inch hose
(included). Two ¾ inch threaded drainage outlets are provided, the lower one
with an internal tap, the upper one with a spigot.
Pump : type RWP
This is a submersible pump which sits in the water on the base of the tank . It has
a 1.5 HP electric motor, and a float switch
*
to ensure that it does not run dry.
Also includes a bypass tap to allow for adjustment of flow and 10m electric
cable. Weight : 65lb (30Kg)
Specify voltage and frequency
.
*
Float Switch only available for 220/240v at 50/60Hz only
Spares Kit for Pump : type SKP
Includes gaskets, seals, bearings etc., suitable for two years normal operation.
Spares and Consumables for Basic Root Washer : type SKR
10 m of ½ inch (12.5mm) diameter water hose (x1)
Root collection funnel (x1)
Root filter (550 micron) (x2)
Nozzle assembly (complete) (x2)
Nozzle assembly "O" rings (x16)
Hose end connector (x2)
Simple Y-piece connector (x2)
Plastic hose clips (15-18mm) (x12)
Plastic Hose clips (17-21mm) (x8)
Screw-top Root containers (x4)
