Delta Electronics AH500, Manual

Page: 23 / 547

A H 5 0 0 M o t i o n C o n t r o l M o d u l e M a n u a l
2.1 Hardware Specifications
Electrical specifications and wiring are described in this chapter. Please refer to other chapters for
more information about the writing of a program and the use of instructions. For more information
about the peripherals purchased, please refer to the manuals attached to them.
2.1.1 General Specifications
Item Specifications
Connector type
High precision connector
It must be connected to an external terminal module.
Supply voltage
5 V DC (-15~20%), 24 V DC (-15~20%)
(AHPS05-5A supplies power through a bus.)
Electric energy
consumption
2 W
Insulation voltage 2,500 VDC
Weight 150 g
Noise immunity
ESD (IEC 61131-2, IEC 61000-4-2):
±
10 kV air discharge
EFT (IEC 61131-2, IEC 61000-4-4): Communication I/O:
±
4 kV
CS (IEC 61131-2, IEC 61000-4-6): 0.15~80 MHz, 3 Vrms
RS (IEC 61131-2, IEC 61000-4-3): 80~100 MHz, 10 V/m, 1.4~2.0 GHz
Operation/Storage
Operation: -20~70
°
C (Temperature), 5~95% (Humidity), pollution degree 2
Storage: -40~85
°
C (Temperature), 5~95% (Humidity)
Vibration/Shock
resistance International standards IEC 61131-2, IEC68-2-6 (TEST Fc)/IEC61131-2 &
IEC 68-2-27 (TEST Ea)
Standard
2.1.2 Electrical Specifications for the Input Terminals

AH20MC-5A
Differential input Item
Specifications
High speed of 200 kHz
Wiring type Independent wiring
Input voltage 5~24 V DC
Maximum input current 15 mA
OFF

ON 20 us
Action
level
ON

OFF
30 us
Response time/Noise
reduction
10 ms/0.5 us
2 - 2