Delta Electronics AE80THTD User Manual Download

Page: 18 / 329

Chapter 2 Creating and Editing Screens

ScrEdit Software User Manual

Revision Apr. 30th, 2007, 2007PDD23000002

2-7

Fig. 2.2.5 New project screen of ScrEdit

There are five parts in the following for ScrEdit editing window.

Menu Bar

There are nine functions for selection: File, Edit, View, Element, Screen, Tools, Options, Window, and

Help.

Toolbar

Toolbar (Fig. 2.2.6) is like those toolbar in Windows® program. It is easy to use for editing and the user

can arrange its position freely. For example, the user can move the Toolbar to the left side of the screen.

Also, the user can arrange the toolbar position by their usage. The followings are the available toolbar on

ScrEdit.

1. Standard

Toolbar

2. Zoom

Toolbar

Summary of Contents for AE80THTD










































































































































































































































































































































Search results

Summary of Contents for AE80THTD

Reviews:

Related manuals for AE80THTD

Brands by name

Popular brands

Delta Electronics AE80THTD, User Manual

Search results

Summary of Contents for AE80THTD

Reviews:

Related manuals for AE80THTD

Brands by name

Popular brands