www.deltadore.com
AUTO
PROG
TYBOX 217 - 227 - 237 - 327 - 337
08/19
> 3s
PROG
5+2
PROG
PROG
x7
Important product
information (
❷
❹
)
1
31
1
12
0
23
0
59
2012 ...
EXIT
1
2
3
4
5
8
9
10
11
6
7
6.00
16°C
16°C
20°C
20°C
20°C
18°C
18°C
8.00
11.00 13.00
17.00
23.00
0.00
P1
P2
P3
P4
P5
P6
6.00
16°C
16°C
20°C
23.00
0.00
P1
P6
TYBOX 3x7
h
(ON)
0 2 3 45
i
STOP
1
31
5°C
15°C
18/02/2012
00.00
Time setting
Turn the selector dial to
.
The days flash.
Press + or - to select the day, then press OK
to confirm and move on to the next setting.
Repeat the process to set
the hours and minutes.
In AUTO mode, pressing the i button displays the room temperature or the temperature setting,
depending on the configuration during installation.
Operating hours counter (boiler)
Room temperature
Set-point temperature
Information button
Interval before maintenance
of the boiler
Return to
automatic mode
Turn the selector dial to AUTO.
Your thermostat follows the programme.
Depending on the configuration during installation,
your device will constantly display the temperature
setting or the room temperature. To change these
settings, refer to the»installation guide» or contact
your installation engineer.
This mode protects your home from frost if you are absent for several days.
Turn the selector dial
and enter the return date.
This mode is used to switch your heating
installation off. Turn the selector dial to
.
In this mode, the device displays the room
temperature.
Enter the return date
The Frost Protection
setting is adjustable
(§ «Setting
temperatures»).
To change the mode
in progress, press OK again.
To cancel the current absence mode, turn the selector dial.
Confirm
Confirm
Return to AUTO
mode at the end of
the countdown, at
00:00.
Press time /
Program «Once» /
Weekly programming /
2 daily programs (week + week-end) /
TYBOX
follows the program «Once».
Countdown
The Frost Protection
setting is adjustable