Operating the projector
Digital Projection E-Vision 4000 Series
Operating the projector
The first time you use the projector,
you can set OSD language from the
quick menu. (See Setting the OSD
language in the user manual.)
See Connecting the power supply
on the previous page.
The direct power on feature can be
enabled in the Settings menu. See
Settings on page 54.
See Using the menus on page 42
for full details of how to use the
controls and the menu system.
Control panel
1
2
3
4
5
Control Panel
1.
SOURCE
Displays and exits the source menu
2.
Arrow buttons & ENTER
Press the left or right arrow button to open the volume menu. Use the left or right arrow
buttons to adjust the audio volume. After opening the OSD, use the arrow buttons to
highlight menu entries. Press
ENTER
to open or execute the highlighted menu entry.
3.
MENU
Displays and exits the OSD.
4.
POWER
Switches the projector on and off (STANDBY).
5.
EXIT
Exits the current OSD page and enters the level above. Exits the OSD when at the top
level OSD page.
Installation & QuickStart Guide
Rev A December 2021
page 23
Notes
