Digital Projection E-Vision 4000 Series
Positioning the screen and projector
Positioning the screen and projector
Always allow the projector to
cool for 5 minutes before
disconnecting the power or
moving the projector.
Ensure that there is at least 50
cm (19.7 in) of space between
the ventilation outlets and any
wall, and 30 cm (11.8 in) on all
other sides.
Do not use the threaded holes
for the adjustable feet to hang
or mount the projector.
Avoid extending the adjustable
feet to the limit of the thread.
1. Install the screen, ensuring that it is in the best position for viewing by your audience.
2. Mount the projector, ensuring that it is at a suitable distance from the screen for the image to fill the screen. Set the adjustable feet so that the projector is
level, and perpendicular to the screen.
1
1
2
2
The drawing shows the positions of the feet for table mounting, and the fixing holes for ceiling
mounting.
1.
Two adjustable feet
1
.
2.
Four M4 holes for ceiling mount
2
.
The screws should not penetrate more than 8 mm into the body of the projector.
Rev A December 2021
page 20
Installation & QuickStart Guide
Notes
