Laser Safety Precautions
Digital Projection E-Vision 4000 Series
Laser Safety Precautions
See Product labels on page 62 for
details about the labels that are
located on the projector.
Warning! Death or Serious Injury could occur if the following precautions are ignored
Permanent/Temporary Blindness Hazard
Class 1 RG2 Laser Product. Caution! Do not stare into beam. Class 1 IEC 60825-1:2014, RG2 IEC 62471-5:2015.
The product should be installed and operated in accordance with the provisions of IEC 62471-5:2015 and the Important Information document or
User Manual
Caution – use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation
exposure.
Do not attempt to operate the product without covers in place.
Do not look directly into the lens when the light source is on. The high brightness can cause permanent eye damage.
Installation & QuickStart Guide
Rev A December 2021
page 19
Notes
