LDB-1se User Manual
20
Set: Bank
There are four banks. Each bank contains 16 patterns and 4 songs. Changing the bank changes the selected
pattern to pattern one of that bank. If a pattern or song was playing, it will change to the newly selected
pattern.
Num
Press a number button to change to the selected bank. Four LEDs will be illuminated indicating
that you have four choices. The current bank will be blinking.
The selected bank number will be immediately saved in non-volatile memory. When the machine starts
up, the bank number will be set to the last selected bank.
Set: Pattern or Song
Changes the current pattern or song. The behavior of this setting is slightly different in different modes.
Pattern Play Mode:
Num
Load Song
: Press a number button to load a previously saved song. There are four songs per bank.
Four LEDs will be illuminated indicating that you have four choices.
Step Edit Mode:
Num
Set Pattern:
Press a number button to change the pattern being edited. All 16 LEDs will be illumi-
nated indicating that you have 16 choices. The current pattern will be blinking. The selected pattern be-
comes the pattern you are editing. If a single pattern is playing, the newly selected pattern starts playing
when the currently playing pattern ends. If you re-set the pattern to the current pattern, then that pattern
is reloaded from non-volatile memory
–
an un-do of any changes made since the pattern was originally
loaded.
Fill Play, Overlay Play, Pad Play, or Pad Record Mode:
Num
Set Pattern:
Press a number button to change the current pattern. The LEDs corresponding to all
of the patterns in the current song will be blinking.
Select Add Pattern to Song:
Hold the Select button while pressing any of the number buttons to create
a multiple pattern song. The patterns will play one after another, then repeat.
Trigger Edit Mode:
If triggers are per-pattern, then Set Pattern works as it does in the Step Edit mode. If triggers are config-
ured as global, then Set Pattern works as in the Fill, Overlay or Pad modes.
