Warnings and Precautions
1
DANGER OF ACCIDENT
When using your Delphi navigation system in a vehicle, it is your sole responsibility to
install, secure and use the device in a manner that will not cause accidents, personal injury
or property damage, or in any manner obstruct your view or interfere with operation of
vehicle safety equipment.
The user of this product is solely responsible for observing safe driving practices. Do not
operate your Delphi navigation system while driving. Park the vehicle first. Do not use the
navigation system or entertainment features if it presents a risk to you or any other person
or if it is a distraction.
OBEY ALL TRAFFIC LAWS
The user is solely responsible for obeying the local traffic laws and observing all road signs.
Local traffic laws and actual traffic signs always have priority over the information and
directions received from the navigation system. The navigation instructions might be
inaccurate or incorrect due to detours or construction.
DELPHI DISCLAIMS ALL LIABILITY FOR ANY USE OF THIS PRODUCT IN A WAY
THAT MAY CAUSE ACCIDENTS, DAMAGE OR THAT MAY VIOLATE THE LAW.
For assistance, call our customer support hotline
at 1-877-667-8700 or visit www.shopdelphi.com.
!
System Contents
2
Installing / Updating Traffic SD Card
3
4
Connecting the Traffic Kit
Note:
SD card update is not required if you purchased NAV200 (NA20067-11B1) or NAV300
1) Remove the original SD card from your NAV200 portable navigation unit.
2) Insert the new Lifetime Traffic SD card into device.
3) Reset the unit by turning the power on/off.
4) Select language when prompted. Wait while the device verifies the upgrade files.
The device will copy the upgrade files to the temporary storage folder on the device.
5) When prompted, remove the new Lifetime Traffic SD card and insert the original SD card.
6) Wait while the device copies the upgrade files onto the original SD card.
7) Press OK when prompted after the file transfer completes.
The device will reset automatically.
8) Restart the Navigation application.
9) The TMC icon will appear on the main screen with an X.
Once you have installed/updated your SD card (not required if you purchased
NAV200 (NA20067-11B1), you can install the Traffic Kit components.
To do this, follow these simple steps:
1) Plug the TMC RECEIVER into the TMC Input Jack on the navigation device.
2) The TMC service will begin searching for a station.
3) Plug the TMC ANTENNA into the TMC RECEIVER.
4) Route the FM antenna along bottom front of windshield.
5) When TMC input is detected, the icon will change to Green.
TRAFFIC
SD CARD
SD Card
TMC Receiver
TMC Antenna
Lifetime
Subscription
WARNING
NOTICE TO DRIVERS IN CALIFORNIA AND MINNESOTA:
State law prohibits drivers in California and Minnesota
from using suction mounts on their windshields. Other Delphi dashboard or friction mounting option should be
used. Delphi does not take any responsibility for any fines or damages that may be incurred as a result of
disregarding this notice. (See California Vehicle Code Section 26708(a); Minnesota Statutes 2005, Section 169.71)
1.
3.
4.
N
O A
CTI
VATIO
N OR RENE
WA
L F
EE
S
LI
FE
TI
ME
TRAFFIC SER
VIC
E
REAL-TIME TRAFFIC KIT
Get there
on
tim
e,
ev
er
y
tim
e!
Works with:
•
Lifetime Traffic
Subscription
•
No Monthly Charges
•
No Activation or
Renewal Fees
•
Clear Channel Service
/
N
O A
CTI
VATIO
N OR RENE
WA
L F
EE
S
LI
FE
TI
ME
TRAFFIC SER
VIC
E
IMPORTANT NOTE:
If you purchased NAV200
(NA20067-11B1) or NAV300,
proceed directly to step 4.
