4
3. TURNING ON TWO-SWITCH MODELS
Turn the thermostat clockwise to its maximum position. Push down both switches. The switch lights stay on
independently of the thermostat cycling. When room reaches the desired temperature, turn the thermostat
knob counter-clockwise very slowly and carefully until you hear a click. This should set your heater to maintain
the desired temperature by cycling on and off as required. Note: The heater normally requires about 15 minu-
tes to reach the desired temperature (depending on the size of the room).
4. USE OF THERMOSTAT
The thermostat operates according to room air temperature, rather than radiator temperature. Turning it
counter-clockwise to smaller numbers would decrease the temperature; clockwise to greater numbers would
increase the temperature.
Antifreeze function
Turn the thermostat dial to the position and push the switches on. The appliance will maintain a minimum
room temperature of approximately 41°F (5°C), thus preventing freezing while conserving energy.
REMINDER
To completely shut the heater off, ON/OFF switches must be set in the OFF position and unplug the unit.
5. COMFORTEMP FUNCTION
With both switches on and the COMFORTEMP button depressed the appliance is automatically set to reach and
maintain the suggested & preset ideal energy-saving temperature. When operating in COMFORTEMP mode,
the half-circle green pilot light is on. To quit the COMFORTEMP function and return to manual operation,
depress the COMFORTEMP button once again.
A safety device
A
safety device
switches the heater off in the event of overheating. To restart the heater, call the nearest ser-
vice center.
6. MAINTENANCE AND SERVICE
Always unplug the heater from the power outlet and allow the radiator to
cool. Wipe radiator with a soft damp cloth; do not use detergents and abra-
sives. Should the radiator not be in use over a certain length of time, roll the
cable around the holder and store it in a dry place (see fig. on front page).
This appliance has been built to last for many years of trouble-free service.
In case of malfunction or doubt, do not try to repair the heater by yourself:
this might increase the risk of fire and electric shock. Call nearest Service
Center Visit www.delonghiusa.com for a completelist of Service Centers
(U.S. Only).
Your product is equipped with a polarized alternating current line plug (a plug having one blade wider than
the other). There is only one way it can be plugged into a power supply. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try again by turning it the other way. If it would still not go in,
it is probably due to an obsolete outlet which should be replaced. Do not temper with the plug or outlet to
defeat the purpose of this safety mechanism.
COMFORTEMP BUTTON
GREEN
COMFORTEMP
LIGHT
