background image

ELECTRICAL CONNECTION

-

Before inserting the plug in an electrical outlet, check carefully to be certain that the voltage in
your home’s electrical system matches the voltage indicated on the appliance and that the socket
and main feed are of a size sufficient to power this appliance.

-

THIS APPLIANCE COMPLIES WITH EEC DIRECTIVE 89/336  REGARDING ELECTROMAGNETIC
COMPATIBILITY.

FUNCTIONING AND USE
Models with function selector and ambient thermostat 

-

Turn the thermostat knob (where included)  in a clockwise direction until it reaches the maximum
setting.

-

Summer service (ventilation only)

: turn the functions knob to setting     .

-

Heating at reduced power

: turn the functions knob  to setting 

1

.

-

Heating at full power

: turn the functions knob  to setting 

2

.

-

Switching off

: turn the functions knob to setting 

0

.

It is always advisable to disconnect the plug when the appliance is not in use.

Models  with thermostat only

The appliance is switched on by turning the knob in a clockwise direction until it reaches the maxi-
mum setting. To switch the appliance completely off turn the knob to the minimum setting      and
remove the plug from the electrical socket.

REGULATING THE THERMOSTAT

When the room has reached the required temperature turn the  thermostat knob in an anti-clockwise
direction up to the point where the appliance switches off and not beyond. The temperature fixed in
this way will be automatically regulated and kept at a constant level by the thermostat.

ANTIFREEZE SERVICE

Turn the functions knob to setting 

2

,  then turn the thermostat knob to setting     . When it is set in this way

the appliance keeps the room at a temperature of approx. 5° C with minimal energy expenditure.

CLEANING AND MAINTENANCE

Before cleaning always remove the plug from the electrical socket.

Clean the air inlet/outlet grilles frequently 

with a vacuum cleaner.

Never use abrasive powders or solvents.

WARNINGS

-

Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.

-

Do not use the heater to dry your laundry. Never obstruct the intake and outlet grilles (danger of
overheating).

-

The heater must be positioned at least 50 cm from furniture or other objects.

-

Do not place the appliance up against walls, furniture, curtains, etc.

-

The appliance must be installed so that the controls can not be reached by persons using the bath
tub or the shower.

-

If the supply cord is damaged, it must be replaced by the manufacturer or it’s service agent or a
similary qualified person in order to avoid a hazard.

-

The heater must not be located directly below a socket-outlet.

-

The appliance is not intended for use by young children or the infirm without supervision.

-

Young children should be supervised to ensure that they do not play with the appliance. 

Do not block the hot-air outlet grilles or the intake grille located on the bottom of the appliance.

Do not use the appliance in rooms less than 4 m

2

in area.

Never cover this appliance in any manner whatsoever while it is operating, becau-
se by doing so you will cause a dangerous increase in the temperature of the
appliance itself.

The heater is fitted with a 

safety device

which will switch off the heater in case of 

acciden-

tal overheating

(eg. obstruction of air intake and outlet grilles, motor turning slowly or not at

all). Take the heater to an authorised service agent who will reset the device.

5714005200HTE1  5-03-2002  14:45  Pagina 3

Reviews: