8
9
• by clients in hotels, motels and other residential type
environments;
• bed and breakfast type environments.
INSTRUCTIONS
read these instructions carefully before using the appliance.
- Failure to respect these instructions may result in burns or
damage to the appliance.
The manufacturer is not liable for damage deriving from
failure to respect these instructions.
Please note:
Keep these instructions.
if the appliance is passed to other persons, they must also be
provided with these instructions.
DESCRIPTION
Description of the appliance
(page 3 -
A
)
a1.
grinding adjustment knob
a2.
Main switch
a3.
Beans container
a4.
Beans container lid
a5.
Cover for funnel and measure compartment
a6.
Measure compartment
a7.
Cup shelf (cup warmer active, when energy Saving is
disabled)
a8.
Pre-ground coffee funnel
a9.
hot water and steam nozzle
a10. Water tank
a11. Power cable
a12. Cup tray
a13. drip tray
a14. Service door
a15. grounds tray
a16. Coffee spout (adjustable height)
a17. Coffee guide
a18. infuser
a19. Control panel
a20. hot water spout
a21. Measure
a22. Cleaning brush
a23. descaler
a24. reactive strip to detect water hardness (Total hardness
test)
Description of the milk container
(page 3 -
B
)
B1.
lid with milk frother
B2.
Container handle
B3.
Clean button
B4.
Milk intake tube
B5.
Frothed milk spout
B6.
Milk container
Description of control panel
(page 3 -
C
)
A number of buttons on the panel have a dual function. This is
indicated in brackets in the description.
C1.
display: guides the user in using the appliance.
C2.
button: to deliver two cups of coffee
(when
you access the MENU: to scroll backwards through the
menu)
C3.
button: to make 1 cup of coffee
(when you access
the MENU: OK button to enable and confirm the selected
function)
C4.
MENU
button: to access the settings menu.
C5.
button: to turn the appliance on and off (stand-
by)
C6.
button to deliver hot water.
C7.
CAPPUCCINO
button to deliver a cappuccino or
frothed milk (press button twice)
C8.
button: to select coffee quantity
(when
you access the MENU: to scroll forwards through the
menu)
C9.
button: to select coffee taste
(When you access
the MENU: ESC to exit the menu)
C10.
button: to perform a rinse cycle
C11.
button: to select pre-ground coffee
PRElIMINARY CHECKS
Checking the appliance
after removing the packaging, make sure the product is
complete and undamaged and that all accessories are present.
do not use the appliance if it is visibly damaged.
Contact de’longhi Customer Services.
Installing the appliance
Important!
When you install the appliance, you should respect the
following safety warnings:
• The appliance gives off heat. After positioning the
appliance on the worktop, leave a space of at least 3 cm
between the surfaces of the appliance and the side and
rear walls and at least 15 cm above the coffee maker.
• Water penetrating the appliance could cause damage. Do
not place the appliance near taps or sinks.
• The appliance could be damaged if the water it contains
freezes. do not install the appliance in a room where the
temperature could drop below freezing point.
• Arrange the power cable in such a way that it cannot be
damaged by sharp edges or contact with hot surfaces
(e.g. electric hot plates).
Connecting the appliance
Important!
Check that the mains power supply voltage corresponds to
the value indicated on the rating plate on the bottom of the
appliance.
Connect the appliance to an efficiently earthed and correctly
installed socket with a minimum current rating of 10a only.
if the power socket does not match the plug on the appliance,
have the socket replaced with a suitable type by a qualified
professional.
