5
or relocable power tap.
20.Make sure that the plug is fully inserted into the outlet. Wall outlets may deteriora-
te with time, so check the plug periodically for signs of overheating or deforma-
tion. If the outlet has deteriorated, stop using it and have it repaired.
21.Check that neither the appliance nor the power cord have been damaged during
shipping.
22.Make sure that no styrofoam or other packing materials remain in the appliance.
23.The first time the appliance is used, run it at the maximum power for at least two
hours. During this time, ventilate the room thoroughly to eliminate the “new” smell
released by the appliance. It is completely normal for the appliance to emit
“creaking” sounds the first time it is run.
24.During use check frequently to determinate if your plug outlet or faceplate is hot.
25.
CAUTION: To prevent electric shock, make sure the wide prong of the plug is
inserted in the wide slot of the outlet.
26.
CAUTION: Risk of fire. Do not open. No user serviceable parts inside.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
Your product is equipped with a polarized alternating current line plug (a plug hav-
ing one blade wider than the other). This plug will fit into the power outlet only one
way. This is a safety feature. If you are unable to insert the plug fully into the outlet,
try reversing the plug. If the plug should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
CAUTION
- Always use the heater in an upright position.
- Do not use the heater to dry your laundry. Never obstruct the intake and outlet grilles
(danger of overheating).
- The appliance must be installed so that the switches and other controls cannot be
reached from a person standing in a bathtub or a shower.
- The electrical cord must be replaced only by authorized personnel.
ELECTRIC POWER CONNECTION
The fan heater must be connected to a properly polarized A/C 110/120 V household out-
let in perfect working condition.
Keep loose clothing or bedding, furniture and flammable material away from the wall out-
let where the heater is plugged in.
REQUIRED TOOLS FOR ASSEMBLY AND ESTIMATED ASSEMBLY TIME
Required Tools(not included):
1 Screwdriver PH 2 x 100 (Phillips type)
Estimated assembly time (carry handle and screws):
5 minutes
INSTALLATION
The fan heater can be easily positioned on any horizontal support surface in an upright
position.
OPERATION
Switching on
Plug into the outlet. Turn the thermostat to maximum. Switch the appliance on using the
switch/switches following the procedures given below:
-
switch in position «
l
» = minimum power (indicator light on);
-
switch in position «
ll
» = maximum power (indicator light on);
To get the maximum power, both switches must be depressed.
Summary of Contents for DUH 500
Page 2: ...2...
