manualshive.com logo in svg

Dell Z9000, Configuration Manual

Share
Download
Dell Z9000 Configuration Manual Download Page 420

B233.00-00     0x00000006   0xC38A       1110         0/0/0

eljefe.00-00 * 0x0000000E   0x53BF       1196         0/0/

1

eljefe.01-00 * 0x00000001   0x68DF       1108         0/0/0

eljefe.02-00 * 0x00000001   0x2E7F       1099         0/0/0

Force10.00-00  0x00000004   0xCDA9       1093         0/0/0

Dell#

Debugging IS-IS

To debug IS-IS processes, use the following commands.

• View all IS-IS information.

EXEC Privilege mode

debug isis

• View information on all adjacency-related activity (for example, hello packets that are sent and 

received).
EXEC Privilege mode

debug isis adj-packets [

interface

]

To view specific information, enter the following optional parameter:
–

interface

: Enter the type of interface and slot/port information to view IS-IS information on that 

interface only.

• View information about IS-IS local update packets.

EXEC Privilege mode

debug isis local-updates [

interface

]

To view specific information, enter the following optional parameter:
–

interface

: Enter the type of interface and slot/port information to view IS-IS information on that 

interface only.

• View IS-IS SNP packets, include CSNPs and PSNPs.

EXEC Privilege mode

debug isis snp-packets [

interface

]

To view specific information, enter the following optional parameter:
–

interface

: Enter the type of interface and slot/port information to view IS-IS information on that 

interface only.

• View the events that triggered IS-IS shortest path first (SPF) events for debugging purposes.

EXEC Privilege mode

debug isis spf-triggers

• View sent and received LSPs.

EXEC Privilege mode

debug isis update-packets [

interface

]

To view specific information, enter the following optional parameter:

420

Intermediate System to Intermediate System

Summary of Contents for Z9000









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands