manualshive.com logo in svg

Dell XPS L702X, Service Manual

The Dell XPS L702X comes with an exceptional range of features, including a powerful processor, stunning visuals, and outstanding audio capabilities. For easy troubleshooting and maintenance, download the free Service Manual from manualshive.com, offering comprehensive step-by-step instructions for optimal performance and longevity.

Share
Download
background image

Wireless Mini-Card(s)

23

 

CAUTION: 

When the Mini-Card is not in the computer, store it in protective 

antistatic packaging. For more information, see "Protecting Against Electrostatic 
Discharge" in the safety information that shipped with your computer.

Replacing the Mini-Card(s)

1

Follow the instructions in "Before You Begin" on page 9.

2

Remove the new Mini-Card from its packaging.

 

CAUTION: 

Use firm and even pressure to slide the card into place. If you use 

excessive force, you may damage the connector.

 

CAUTION: 

The connectors are keyed to ensure correct insertion. If you feel 

resistance, check the connectors on the card and on the system board, and realign 
the card.

 

CAUTION: 

To avoid damage to the Mini-Card, never place cables under the card.

book.book  Page 23  Wednesday, April 25, 2012  2:11 PM

Summary of Contents for XPS L702X











































































































































Reviews:

No comments

Related manuals for XPS L702X

Brands by name

Popular brands

Load more brands