Dell Wyse 5470, Service Manual

Page: 21 / 79

Steps
1 Remove the screw (M2x3) that secures the thermal plate to the palm-rest and keyboard assembly.
2 Flip the thermal plate to one side and lift it away from the thin client.
3 Remove the screw (M2x2) that secures the solid-state drive to the palm-rest and keyboard assembly.
4 Slide and remove the solid-state drive from the solid-state drive slot.
Installing the M.2 solid-state drive
Prerequisite
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the solid-state drive and provides a visual representation of the installation procedure:
Removing and installing components 21