2. Tighten the two captive screws (6-32) that secure the side cover to the chassis.
Next steps
After working inside your computer
.
Front bezel
Removing the front bezel
Prerequisites
Before working inside your computer
.
2. Remove the
.
About this task
The following images indicate the location of the front bezel and provide a visual representation of the removal procedure.
Steps
1. Place the computer in an upright position.
2. Gently pry and release the front bezel tabs sequentially from the top.
3. Move the front bezel outward from the chassis.
4. Remove the front bezel from the computer.
14
Disassembly and reassembly
Summary of Contents for Vostro 5890
