7. Connect the keyboard cable to the system board and close the latch to secure the cable.
8. Connect the touchpad cable to the system board and close the latch to secure the cable.
9. Connect the fingerprint-reader cable to the system board and close the latch to secure the cable.
10. Connect the speaker cable to the system board.
11. Connect the I/O-board cable to the system board and close the latch to secure the cable.
12. Adhere the tape that secures the I/O-board cable to the system board.
1. Install the
2. Install the
3. Install the
4. Install the
5. Install the
.
6. Install the
or
, whichever applicable.
7. Install the
.
8. Install the
.
9. Follow the procedure in
After working inside your computer
.
Display bezel
Removing the display bezel
1. Follow the procedure in
Before working inside your computer
.
2. Remove the
3. Remove the
.
4. Remove the
5. Remove the
.
The following image indicates the location of display bezel and provides a visual representation of the removal procedure.
1. Carefully pry the edges of the display bezel off the display back-cover.
2. Remove the display bezel off the display back-cover.
Removing and installing components
49
Summary of Contents for Vostro 5391
