manualshive.com logo in svg

Dell Vostro 3681, Service Manual

The Dell Vostro 3681 is a powerful and efficient desktop computer designed for business professionals. With its compact design and advanced features, it offers seamless performance. To get started, simply visit our website and download the free Setup And Specifications manual to ensure a hassle-free setup and optimal usage experience.

Share
Download
background image

SD card

Removing the media card reader

Prerequisites

1. Follow the procedure in 

Before working inside your computer

.

2. Remove the 

side cover

.

3. Remove the 

front bezel

.

4. Remove the 

HDD/ODD bracket

.

About this task

The following images indicate the location of the front cover and provide a visual representation of the removal procedure.

Steps

1. Unroute the PSU power cable from over the SD card reader.
2. Remove the two M3x5 screws securing the SD card reader to the chassis.
3. Lift and remove the SD card reader from the system board.

Installing the media card reader

Prerequisites

About this task

The following images indicate the location of the media card reader and provide a visual representation of the installation procedure.

Disassembly and reassembly

39

Summary of Contents for Vostro 3681

































































Reviews:

No comments

Related manuals for Vostro 3681

IBM BladeCenter HC10 Type 7996 Installation And User Manual preview
BladeCenter HC10 Type 7996
Brand: IBM Pages: 74
Tangent T22B Basic Operation Manual preview
T22B
Brand: Tangent Pages: 2
DATA FROM SKY TrafficXRoads Manual preview
TrafficXRoads
Brand: DATA FROM SKY Pages: 40
Gateway DX440X Reference Manual preview
DX440X
Brand: Gateway Pages: 140
XtendLan TC-965 User Manual preview
TC-965
Brand: XtendLan Pages: 65
Acnodes FES9300 Mounting Installation Manual preview
FES9300
Brand: Acnodes Pages: 10
Packard Bell iDesign Series Disassembly Manual preview
iDesign Series
Brand: Packard Bell Pages: 13
Packard Bell iXtreme Disassembly Manual preview
iXtreme
Brand: Packard Bell Pages: 15
Scheppach 5907103900 Manual preview
5907103900
Brand: Scheppach Pages: 56
Spectrum Industries Flex Insight XMS Owner'S Manual preview
Flex Insight XMS
Brand: Spectrum Industries Pages: 11
Agilent Technologies R Series User Manual preview
R Series
Brand: Agilent Technologies Pages: 220
MeLe PCG09 Quick Start Manual preview
PCG09
Brand: MeLe Pages: 6
RACORE COMPUTERS DRIVE TWO PLUS 1500 Installation Instructions Manual preview
DRIVE TWO PLUS 1500
Brand: RACORE COMPUTERS Pages: 66
IBM NetVista Guía Del Usuario preview
NetVista
Brand: IBM Pages: 120
Motorola F5218 Quick Reference Manual preview
F5218
Brand: Motorola Pages: 143
Tandy Color Computer 3 TRS-80 Diagnostic Manual preview
Color Computer 3 TRS-80
Brand: Tandy Pages: 13
NCR PC4I Owner'S Manual preview
PC4I
Brand: NCR Pages: 167
IEI Technology DRPC-330-A7K Series User Manual preview
DRPC-330-A7K Series
Brand: IEI Technology Pages: 74

Brands by name

Popular brands

Load more brands