Power management screen options
Option
Description
AC Recovery
Specifies how the computer will respond when AC power is applied after an AC power loss. You can set the AC
Recovery to:
•
Power Off (default)
•
Power On
•
Last Power State
Auto On Time
Allows you to set the time at which the computer must turn on automatically. The options are:
•
Disabled
•
Every Day
•
Weekdays
•
Select Days
Default setting: Disabled
NOTE:
This feature does not work if you turn off your computer using the switch on a power strip or
surge protector or if Auto Power is set to disabled.
Deep Sleep Control
Allows you to define the controls when Deep Sleep is enabled.
•
Disabled
•
Enabled in S5 only
•
Enabled in S4 and S5 – This option is enabled by default.
USB Wake Support
Allows you to enable USB devices to wake the system from Standby.
NOTE:
This feature is only functional when the AC power adapter is connected. If the AC power
adapter is removed during Standby, the system setup removes power from all the USB ports to
conserve battery power.
•
Enable USB Wake Support
Default setting: The option is disabled.
Wake on LAN/
WLAN
Allows you to enable or disable the feature that powers on the computer from the Off state when triggered by a
LAN signal.
•
Disabled
•
LAN Only
•
WLAN Only
•
LAN or WLAN
•
LAN with PXE Boot
Default setting: Disabled
Block Sleep
This option lets you block entering to sleep (S3 state) in operating system environment.
Block Sleep (S3 state)
Default setting: This option is disabled
52
System Setup Options