![Dell Vostro 3590 Owner'S Manual Download Page 54](http://html.mh-extra.com/html/dell/vostro-3590/vostro-3590_owners-manual_2468030054.webp)
Installing the system board
1
Connect the WWAN and fingerprint cables to the connectors on the bottom side of the system board.
NOTE:
This step is applicable only for systems shipped with WWAN card and fingerprint reader.
2
Align the system board with the screw holders on the computer.
3
Tighten the M2x4 screw to secure the system board to the computer.
4
Connect the Power button board, I/O, touchpad, keyboard backlight, and the keyboard cables to their respective connectors.
5
Connect the DC-in, Speaker, hard drive and the VGA cables to their respective connectors.
6
Route the VGA cable through its routing channel.
7
Install the:
a
b
c
d
e
8
Follow the procedure in
After working inside your computer
.
54
Removing and installing components
Summary of Contents for Vostro 3590
Page 1: ...Latitude 3590 Owner s Manual Regulatory Model P75F Regulatory Type P75F001 ...
Page 15: ...4 Lift the base cover away from the computer Removing and installing components 15 ...
Page 34: ...c Lift the fingerprint reader off the computer 34 Removing and installing components ...
Page 94: ...94 Software ...