5. Install the:
a)
b)
c)
6. Follow the procedure in
After working inside your computer
.
Display assembly
Removing the display assembly
NOTE:
This process is for both touch and non-touch LCDs.
1. Follow the procedure in
Before working inside your computer
.
2. Remove the:
a)
b)
c)
d)
e)
3. Remove the tape [1] and unroute the antennae cable [2] near the fan case.
4. Remove the single screw that secures the EDP bracket [3] and remove it off the EDP connector on the system board [4].
5. Disconnect the EDP cable from the system board [5].
70
Disassembly and reassembly
Summary of Contents for Vostro 3300
