manualshive.com logo in svg

Dell Vostro 14 - 3445, Owner'S Manual, Page: 35 / 49

Share
Download
Dell Vostro 14 - 3445 Owner'S Manual Download Page 35

L2 Cache

Displays the L2 cache.

Fixed HDD

Displays the fixed HDD 
information.

SATA ODD

Displays the type, model number 
and capacity of the hard drive.

AC Adapter Type

Displays the AC adapter type.

System Memory

Displays the system memory.

Extended Memory

Displays the extended memory.

Memory Speed

Displays the memory speed.

Advanced

The Advanced tab allows you to set various functions that affect the performance of the computer. The 
table below defines the function of each option and its default value.

Processor Configuration

PowerNow!

Enable or disable PowerNow! 
mode.

Default: Enabled

Virtualization

Enable or disable AMD 
Virtualization.

Default: Enabled

Integrated NIC

Enable or disable the integrated 
NIC.

Default: Enabled

USB Emulation

Enable or disable USB Emulation. Default: Enabled

USB Wake Support

Enable for disable USB Wake 
Support.

Default: Disabled

SATA Operation

Allows you to choose the SATA 
operation mode.

Default: AHCI

Adapter Warnings

Enable or disable adapter 
warnings.

Default: Enabled

Function Key Behavior

Choose between Function Key 
and Multimedia Key

Default: Multimedia Key

Battery Health

Displays health of the battery.

Miscellaneous Devices

External USB Ports

Enable or disable the external 
USB ports.

Default: Enabled

Microphone

Enable or disable the 
microphone.

Default: Enabled

Camera

Enable or disable the camera.

Default: Enabled

35

Summary of Contents for Vostro 14 - 3445


















































Reviews:

No comments