Great user manuals database on
Monitor Specifications
Power Management Modes
If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use.
This is referred to as Power Save Mode. The monitor automatically resumes functioning when the computer detects input from the keyboard, mouse, or other
input devices. The following table shows the power consumption and signaling of this automatic power saving feature:
Activate the computer and the monitor to gain access to the
.
* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.
Pin Assignments
15-pin D-Sub connector
The following table shows pin assignments in the D-Sub connector:
Left side
Right side
VESA Modes
Horizontal Sync Vertical Sync Video
Power Indicator Power Consumption
Normal operation (with Dell Soundbar and USB active) Active
Active
Active
Green
75 W (maximum)
Normal operation
Active
Active
Active
Green
35 W (typical)
Active-off mode
Inactive
Inactive
Blanked Amber
Less than 2 W
Switch off
-
-
-
Off
Less than 1 W
NOTE:
The OSD only functions in the normal operation mode. One of the following messages appears when the
“
menu
”
or
“
plus
”
buttons are pressed when in
Active-off mode.
1. Auto Detect (Analog Input)
In Power Save Mode
Press Computer Power Button
or Any Key on Keyboard or Move Mouse
or
1. Auto Detect (Digital Input)
In Power Save Mode
Press Computer Power Button
or Any Key on Keyboard or Move Mouse
2. Analog Input
In Power Save Mode
Press Computer Power Button
or Any Key on Keyboard or Move Mouse
or
3. Digital Input
In Power Save Mode
Press Computer Power Button
or Any Key on Keyboard or Move Mouse
This monitor is
ENERGY STAR
®
-compliant as well as TCO '99 / TCO '03 power management compatible.
Pin Number Monitor Side of the 15-pin Side Signal Cable
1
Video-Red
2
Video-Green
3
Video-Blue
4
GND
5
Self-Test
6
GND-R
7
GND-G
8
GND-B
9
DDC +5V
10
GND
