Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
351
5 In the
Apply Policy to
field, click the IP Address option.
6 Define a name for the policy in the
Policy Name
field.
7 Type an IP address in the
IP Address
field.
8 In the
Port Range/Port Number
field, optionally enter a port range or an individual port.
9 In the
Service
drop-down list, click on a service object.
10 In the
Status
drop-down list, click on an access action, either
Allow
or
Deny
.
11 Click
Accept
.
Adding a Policy for an IP Address Range
1 In the
Apply Policy to
field, click the IP Address Range option.
2 Define a name for the policy in the
Policy Name
field.
3 Type a starting IP address in the
IP Network Address
field.
4 Type a subnet mask value in the
Subnet Mask
field in the form 255.255.255.0.
5 In the
Port Range/Port Number
field, optionally enter a port range or an individual port.
6 In the
Service
drop-down list, click on a service option.
7 In the
Status
drop-down list, click on an access action, either
Allow
or
Deny
.
8 Click
Accept
.
Adding a Policy for All Addresses
1 In the
Apply Policy to
field, select the
All Addresses
option.
2 Define a name for the policy in the
Policy Name
field.
3 The
IP Address Range
field is read-only, specifying All IP Addresses.
4 In the
Service
drop-down list, click on a service option.
5 In the
Status
drop-down list, click on an access action, either
Allow
or
Deny
.
6 Click
Accept
.
Setting File Shares Access Policies
To set file share access policies:
1 Navigate to
Users > Local Users
.
2 Click the configure icon next to the user you want to configure.
3 Select the
Policies
tab.
4 Click
Add Policy
.
5 Select
Server Path
from the
Apply Policy To
drop-down list.
