manualshive.com logo in svg

Dell SE2422HM, User Manual

Share
Download
Dell SE2422HM User Manual Download Page 62

62

        |       Troubleshooting

Troubleshooting

 WARNING:  Before you begin any of the procedures in this section, follow 

the 

Safety instructions

.

Self-test

Your monitor provides a self-test feature that allows you to check whether your 
monitor is functioning properly. If your monitor and computer are properly connected 
but the monitor screen remains dark, run the monitor self-test by performing the 
following steps:

1.  Turn off both your computer and the monitor.

2.  Unplug the video cable from the back of the computer. To ensure proper Self-Test 

operation, remove all video cables from the back of computer.

3. 

Turn on the monitor.

If the monitor is working correctly and detects no input signal, depending on the 

connectivity, one of the following dialog appears.  While in self-test mode, the power 

LED remains white.

The display will go into Standby mode in 4 minutes.

www.dell.com/SE2422HR

Dell 24 Monitor

SE2422HR

No HDMI Cable

or

The display will go into Standby mode in 4 minutes.

www.dell.com/SE2422HR

Dell 24 Monitor

SE2422HR/SE2422HM

No VGA Cable

www.dell.com/SE2422HM

or

Summary of Contents for SE2422HM






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands